Flash is a popular necessity today, especially for students, students and office employees. Various ways are done to maintain the durability of the flash.
A flash drive also known as a USB flash drive is a USB connecting device capable of storing documents with a capacity of 2 to 512 gigabytes.
A lightweight, tiny-like flash is a priority, but what if suddenly your flash isn’t readable?
1. Check the Physical Condition of the Flash
Correction of USB ports and flash connectors, if there is dirt it may be that your flash is illegible. If you find any dirt, try cleaning it using a cleaning brush.
On the brass plate, clean it with a rubber eraser slowly. Be ware of the inner components, so that the flash does not become damaged.
2. Check USB drivers
When the flash is already connected to your PC or laptop, it is still unreadable. Try signing in to Control Panel, then selecting Device Manager, and selecting Universal Serial Bus controllers.
Continue checking the USB Mass Storage Device, if there is a yellow warning sign, it can be confirmed that your USB driver is in trouble.
If that happens, you can reinstall the USB driver again on your laptop device or PC. The easy way, just right-click on the USB Mass Storage Device, select Uninstall device, then choose Uninstall in the warning pop-up. Then unplug the flash and plug it in again.
After you follow each of these steps, try restarting your PC or computer.
3. Check Flash Status with Command Prompt
How to resolve the next unreadable flash using a command prompt. This can help you check the status of the flash. In an easy step, open the command prompt by clicking the Windows logo, and then type a command prompt.
When a black window appears, type the command chkdsk G:, change the letter G to the letter that corresponds to what the flash flash shows on your PC or laptop, such as F, H and others.
Then press Enter, and check what the command command prompt shows. If your flash is problematic, there will be a notification that Windows found an error, and so on.
4. Use Computer Management
If the previous three steps haven’t yielded results, try using the computer management app. How to open the search field and type “computer management”, then press enter.
Next select Disk Management, and right-click on the name of your flash. Select Change Drive Letter and Paths. After clicking Change, a new Assign the following drive letter will appear. Select the letters listed in the right drop-down menu, and click ok.
Continue right-clicking again on the flash name and clicking Format. Type the name of the flash, file system type and size. Once formatted, your flash should be readable again. But the risk is that the contents of the flash become clean and empty of data.
How to Take Care of the Right Flash
- Do not save the file or document too full. We recommend compressing folders into .rar or .zip shapes
- Avoid editing files directly on the flash drive. It is recommended to copy the file on your PC or laptop and edit it until it is finished, only to paste it into the flash again.
- Do not format the flash very often, as it can damage and reduce the number of restrictions.
- Avoid being close to magnetic fields for too long, such as tVs or speakers.
- Do not let the flash often shake, fall or submerge the water.
- Place the flash in a safe place with the temperature not too hot or too cold, to keep the components safe.
- Always eject or stop before unplugging the flash.
- Unplug immediately when you’re done, don’t leave the flash on your device for too long.
- Directly scan the antivirus if the flash has just switched devices.
- Make sure the flash is closed and avoid dirt, so that the components are maintained and not rusty.
- Always use the secure release features provided by the computer, the majority of which are provided by Windows, such as “Safety Remove Hardware”
These are some ways to deal with unreadable flash and how to take proper care of it, so that your flash lasts. Good luck.